Monitoring the Fresh Kills Landfill (Available in the Geoenvironmental Special Section only)
A unique system has been developed to assess the stability of the Fresh Kills Landfill, in New York City, using more than 260 geotechnical instruments and automatic processes. The system...

Sprinkler Irrigation
In sprinkler irrigation, water is applied to the soil using a pressurized piping system with nozzles, jets, or perforated pipe that sprays the water into the air. These sprinkler devices...

Cap of Concrete
The roof of a new $84 million arena in New Orleans was built using techniques usually seen in tied-arch concrete bridges. The concrete components of the roof carry the large compression...

Up against the Wall (available in Geoenvironmental special issue only)
A tight site in Portland, Oregon, bounded by existing roads and a light rail line and bordered by underground utilities, required project engineers to develop a new type of shoring wall...

Under Pressure
The Arrowhead East and West contracts for the Inland Feeder water conveyance system being built in California consist of 51,500 ft (15,700 m) of tunnels that cross the San Andreas Fault...

For the Duration
The U.S. Army Corps of Engineers developed a new grouting method called duration grouting when constructing the foundations for the Portugues Dam in Ponce, Puerto Rico. The site is marked...

Blasting Densifies Volcanic Debris (Available only in Focus on Geo/Environmental Special Issue)
The relatively new ground improvement technology of blast densification overcame soil problems posed by volcanic ash at Mount St. Helens National Volcanic Monument. In 1993 WSDOT began...

Depth-Averaged Boussinesq Equations Applied to Flow in a Converging Channel
Supereritical flow in a contracting channel is simulated by numerically solving the 2D depth-averaged Boussinesq equations using a fmite-difference model DASH (Molls and Chaudhry 1995,...

Genetic Algorithm Design of Piped Irrigation Systems
The design of piped irrigation systems is a complex matter. In its simplest form it involves the selection of the sizes of pipes and other hydraulic elements so as to ensure that the varying...

Experimental Uncertainty and Measurement Errors in Hydraulic Engineering
The Task Committee on Experimental Uncertainty and Measurement Errors was formed to provide information and guidance on current practices used for describing and quantifying measurement...

Analysis of Exceptional Meteorological Conditions on July and August in Conakry
Conakry is a zone that receives more precipitation than other countries in West Africa. Sometimes the quantity is more than 4,000 mm per year. Strong rainfalls are observed between July...

Field Determination of Flow through a Pressure Regulating Valve
This paper presents a computer methodology to calculate flow through a pressure regulating valve for different opening percentages and a given pressure differential. The methodology is...

Capillary Pressure-Saturation Relationships in Fracture
Understanding and quantifying unsaturated flow through fractures in rocky slope is important for design and construction of drainage system in large-scale hydraulic engineering. The data...

Study of Interaction Between Pneumatic Spherical and Cylindrical Form Shells Subjected to Wind Pressure
In the design of pneumatic membrane structures, analysis of stress and deformations of structures subjected to wind is among the most important requirements. For the purpose of studying...

Spacecab: A Concept for Commercial Human Spaceflight
This paper will describe the Spacecab conceptual design and operational scenario. Spacecab is not necessarily a unique design solution but it does illustrate a design philosophy that differs...

Safety Assessment of a Chemical Reactor Vessel
The potential explosion loadings on a chemical reactor vessel is described in this paper. The potential loads presented provide a basis for designing spherical storage vessels which will...

Dynamic Testing of Unreinforced Brick Masonry Infills
A significant seismic hazard may exist when unreinforced masonry infill panels fall out of their surrounding frames as a result of excessive accelerations applied normal to their plane....

Uplift Resistance of Plywood and OSB Roof Sheathing
A test program to determine the resistance of plywood and OSB roof sheathing to uplift pressures created by wind flowing over a residential roof structure will provide valuable data to...

A Probabilistic Approach to the Response of Tall Buildings to Wind Loadings
Tall buildings constructed in recent years are light in weight, flexible and low in damping. This is the consequence of using lighter material with higher strength, and fewer interior...

Gust Speeds in Hurricanes
Based on strip-chart records of wind speeds representing 11 recording stations and four hurricanes, it is concluded that gust factors for hurricanes generally exceed the gust factors proposed...

 

 

 

 

Return to search